Additional stuff you may be interested in:
Caddy for reverse proxy (accessing your services with a nice URL instead of IP address and port numbers)
PiHole for DNS-level ad-blocking and other useful router functionality
Look for a backup solutions for your config files, maybe you can handle this at Proxmox level but I don’t have experience with that.
Do you have a good alternative to recommend? I also found that lidarr sorta sucks compared to sonarr and radarr
- what you use for your documentation
Markdown files
- how you organize it
What ?
- what information you include
The commands that worked and the stuff that didn’t work and the links to the source of information
- how you work documentation into your changes
I write as I go. I keep it as part of a git repository when relevant
BTRFS has plenty of features for data integrity, auto-correction, scrubbing, snapshots. I haven’t studied in details the differences with ZFS, I just went with BTRFS because the setup is fairly simple, it’s flexible and it does what I need.
Personally, I use BTRFS in RAID10 config. I don’t need crazy performance and my NAS is pretty low power with only 8GB of RAM (use to be 4GB on my previous setup).
Nothing wrong with wanting a web interface, but for an experienced Linux user, there is no issue going without one.
Plain, good old Debian. It’s not that big of a deal to do all the config in console via SSH. You do it once and you’re done, so is the web interface that important?
Hi! I recently started with home automation myself. Despite already having a home server, I decided to get a dedicated Raspberry Pi 5 4GB to run home assistant by itself. OpenHAB should work just as well on the RPi5.
I’ve got Zigbee and Matter over Thread connectivity using 2x Aeotec Zi-Stick dongles, one flashed with OpenThread firmware, instructions on their forum. It was not the best solution to use the same dongle for both protocols as it’s recognized with the same device name in Home Assistant and I had to use my Linux skills to work around that. You can easily get 2 zigbee dongles from different brands, check ahead which ones provide an easy OpenThread flashing solution. I think the Sonoff dongle is another one of these.
Living the good life
I’ve recently started with home assistant on a pi as well. Today I have 2 zigbee relay for my lights from Sonoff, 2 zigbee fire alarms, 1 wifi plug from Shelly and 3 Ikea remotes working on Matter over Thread.
Basically, any protocol you want to support other than wifi and Bluetooth will need a dedicated radio device. Luckily they are all pretty well supposed with home assistant. I have 2 Aeotec Zi-stick, one for Zigbee, the other flashed with OpenThread firmware (that’s for Matter over Thread, it wasn’t a good idea to buy twice the same device, I had to work around this issue). I don’t have Z-wave devices today, as I noticed they tend to be more expensive that the zigbee equipment. The new IKEA smart devices are very competitive in terms of price, they all work on Matter over Thread protocol.
In the end, you don’t need to choose. You can support all these protocols on the same raspberry pi. It’s just a matter of adding the corresponding radio and integration in home assistant.
Reconnected my light switches to home assistant. I just had to press the pairing button on the device again for some reason. But it’s inside de Switch box in the wall, not so practical. I wich they thought of another way to put the device in pairing mode, like switch one-off 10 times, something like that.
Be careful before uploading your config files to a public location like GitHub, you don’t want to inadvertently publish some secrets like passwords, API keys and such. A copy to an external drive should do the trick just fine as a starting point.